husqvarna 40

husqvarna 40 in tips

husqvarna 40 tips

husqvarna 40 tips.The safest method is to use a winch.
A tractormounted b portable there are methods for felling trees with a diameter larger than the bar length.
However these methods involve a much greater risk that the kickback zone of the bar will come into contact with the tree.
Unless you have special training we advise you not to fell trees with a diameter larger than the bar length of your saw!
Most kickback accidents happen during limbing!
Pay close attention to the position of the kickback zone of the bar when you are limbing branches that are in tension!
In complicated situations the only safe method is to put aside your chain saw and use a winch.
Make sure there are no obstacles in your way.
Work on the left side of the trunk.
Work close to the saw for maximum control.
If possible, let the weight of the saw rest on the trunk.
Keep the tree between you and the saw as you move along the trunk.
Make one or more cuts at or near the breaking point.
Make as many cuts of sufficient depth as necessary to reduce the tension and make the tree or branch break at the breaking point.
Never cut straight through a tree or branch that is is in tension!
Ï»¿ however these methods affect a much outstanding hazard that the kickback zone of the bar will come into contact with the tree.
Unless you have particular preparation we propose you not to fell trees with a diameter larger than the bar length of your saw.
Ï»¿ unless you have particular preparation we propose you not to fell trees with a diameter larger than the bar length of your saw.. husqvarna 40

Husqvarna 40 cc Chainsa... (4:01:24)
14,293 views
"1 Miro St Taupo 07 378 2673 psl agri"